Contact Us

Compressive Strength of Concrete Using Sawdust as

2016-9-9  at 10% sawdust replacement, production costs and weight reduced by 3% and 10% respectively. Usman et al (2012) found out that the strength of concrete reduced with sawdust as fine aggregate due to its higher rate of water absorption and the optimum replacement was 25%. Olutoge (2010) investigated the suitability of palm kernel shells and 1349 IJSER © 2016

Use of Saw Dust as Fine Aggregate in Concrete Mixture

2018-10-1  sand as fine aggregate in concrete production is very high, and several developing countries have encountered some strain in the supply of natural sand in order to meet the rising needs of infrastructural development in recent years. However, accumulation of unmanaged wastes especially in developing countries has resulted in an increasing environmental concern. However, the increase in the acceptance of using environmental friendly, lightweight construction materials in construction industry has brought about the need to study how this can be accomplished by benefiting environment as well as maintaining the material requirements affirmed in the standards. Since an enormous need has been placed on building material industry especially in the last decade due to the increasing population that causes a continuing shortage of building materials, the civil engineers have been challenged to convert the industrial wastes to useful building and construction materials. Sawdust is an industrial waste, by-product of cutting, grinding, drilling, sanding, or otherwise pulverizing wood with a saw or other tool; it is composed of fine particles of wood. The main constituents of sawdust include cellulose, hemicelluloses, lignin and extractives. In an investigation on the use of sawdust as sand

(PDF) Effect of Sawdust as Fine Aggregate in Concrete

Sawdust can be used as alternative substitute for fine aggregate in concrete production [8, 10]. Sawdust should be washed and cleaned before use as concrete constituent because of large amount of bark which can affect setting and hydration of cement.

[PDF] Effect of Sawdust as Fine Aggregate in Concrete

This experimental study aimed to develop an acceptable concrete mixture with sawdust particles as substitute to fine aggregate that can be used for building construction particularly in residential class concrete slab and analyze the effect of sawdust concrete mixture in terms of adhesion of aggregates, thermal insulation, workability and surface quality.

(PDF) IRJET- Use of Saw Dust as Fine Aggregate in

Many of these by-products are used as Certain animals, birds and insects which live in wood, aggregate for the production of lightweight concrete [2]. The such as the carpenter ant are also responsible for most extensively used fine aggregate for the making of producing the saw dust.

SOLIGNUM TREATED SAWDUST AS FINE AGGREGATE

In conclusion sawdust as an air entraining agent has n appreciable positive effect on the compressive strength of concrete. The reduction in strength of concrete with sawdust as fine aggregate was due to its higher rate of water absorption because the higher the water contents in

THE USE OF SAWDUST ASH AS FINE AGGREGATE

Sawdust ash as fine aggregate is of particular interest, because their use can considerably reduce the problem of dumping and waste storage simultaneously helps the preservation of natural fine aggregate resources. There is however some obstacles for the use of sawdust ash aggregate in concrete.

Study of Sawdust Concrete Properties as Construction

2016-12-16  materials such as cement, basalt and sand for the production of concrete. The River sand which is most commonly used fine aggregate in the production of concrete, posses the problem of acute shortage in many areas, whose continued use has started posing serious problems with respect to its availability, cost and environmental impact.

(PDF) Study of Sawdust Concrete Properties as

The River sand which is most commonly used fine concrete is not very much popular but in countries like united aggregate in the production of concrete, posses the problem of states of America, United Kingdom other European countries, acute shortage in many areas, whose continued use has started sawdust concrete is very popular. posing serious problems with respect to its availability, cost and

Sustainable production of concrete containing

2018-7-20  The above mentioned studies have verified the suitability of WG as fine aggregate in concrete mixes at wide ranging percentage variation. Most of the researchers have reported increase in mechanical properties by using WG in concrete mixes as a substitute of fine aggregate in range of 15–25%,,,. In line with this outcome, in this present

the production of concrete with fine sawdust as fine

The performance of wood aggregate concrete was compared with control concrete that contained only crushed stone aggregate. The compressive strength of control concrete was 31.40 MPa and that of wood aggregate concrete with 15% replacement level was 32.36 . PARTIAL REPLACEMENT OF FINE AGGREGATE (SAND) BY SAWDUST .

(PDF) Effect of Sawdust as Fine Aggregate in Concrete

Sawdust can be used as alternative substitute for fine aggregate in concrete production [8, 10]. Sawdust should be washed and cleaned before use as concrete constituent because of large amount of bark which can affect setting and hydration of cement.

SOLIGNUM TREATED SAWDUST AS FINE AGGREGATE

The cost of construction has been on the increase which has become a concern to both individuals and government of especially developing countries, and that is why this study is aimed at using available cheap materials (sawdust) in concrete production. Concrete mix ratio of 1:2:4 was used and replaced with fine aggregate at 5%, 10%, 15% and 20% with soligum treated sawdust.

Study of Sawdust Concrete Properties as Construction

2016-12-16  materials such as cement, basalt and sand for the production of concrete. The River sand which is most commonly used fine aggregate in the production of concrete, posses the problem of acute shortage in many areas, whose continued use has started posing serious problems with respect to its availability, cost and environmental impact.

Effect of Sawdust on the Compressive Strength of Concrete

2020-8-4  it workable. The addition of sawdust to the concrete was done by 5% increment up to 25% by weight of the fine aggregate. In all eighteen (18) concrete cubes (150mm x150mm x 150mm) were made after batching and mechanical mixing for the compressive strength tests. 2.4 Compressive strength tests

Concrete using agro-waste as fine aggregate for

2016-12-1  The Agricultural wastes used as fine aggregate in concrete are sugarcane bagasse ash, groundnut shell, oyster shell, sawdust, giant reed ash, rice husk ash, cork and tobacco waste. The major differences of these agro-wastes are the place from where they collected and the processes to convert into a fine aggregate.

Sawdust as an Alternative Material for Sand in

The study determined the strength of concrete mixture with sand and concrete mixture with sawdust in three different curing periods; 7 days, 16 days and 28 days. Experimental method was used by the researchers for it examined and investigated the possibility of using sawdust as a fine aggregate in concrete

Table of content for a project work on sawdust in

Table of content for a project work on sawdust in partial replacement of fine aggregate in concrete production Products. As a leading global manufacturer of crushing, grinding and mining equipments, we offer advanced, reasonable solutions for any size-reduction requirements including, Table of content for a project work on sawdust in partial replacement of fine aggregate in concrete production

Alternative fine aggregates in production of

2020-9-20  Aggarwal and Siddique (2014) observed that compressive strength of the concrete reduced with addition of WFS and CBA at the equal replacement of fine aggregate in concrete. 40% of steel slag was found to higher strength as compared to control concrete beyond which the strength reduces (Qasrawi et al., 2009; Subathra Devi and Gnanavel, 2014).

(DOC) investigation into the use of saw dust as an

Table 3.1 Mix ratio and percentage Sawdust content Specimen A B0.25 B0.50 B0.75 B1.0 Design 1:1.8:2.8:0.65 Proportion (cement: fine aggregate: coarse aggregate: water/cement Weight fraction 0.00 0.25 0.50 0.75 1.0 of sawdust (%) Table 3.2 Detail

the production of concrete with fine sawdust as fine

The performance of wood aggregate concrete was compared with control concrete that contained only crushed stone aggregate. The compressive strength of control concrete was 31.40 MPa and that of wood aggregate concrete with 15% replacement level was 32.36 . PARTIAL REPLACEMENT OF FINE AGGREGATE (SAND) BY SAWDUST .

stone dust and sawdust as alternative for aggregate in

2012-11-21  Concrete is an artificial conglomerate stone crushed rock fines as an alternative to sand in concrete production fine aggregate for concrete production is sand Concrete Mix Proportions Lightweight Aggregates. Lightweight Concrete Aggregates Sawdust can be added to concrete as a lightweight alternative to sand

Investigation of Properties of Concrete Using Sawdust as

aggregate for the production of lightweight concrete (Adewuyi and Adegoke, 2008). The most widely used fine aggregate for the making of concrete is the natural sand mined from the riverbeds. However, the availability of river sand for the preparation of concrete is becoming scarce due to the excessive nonscientific methods of

Study of Sawdust Concrete Properties as Construction

2016-12-16  materials such as cement, basalt and sand for the production of concrete. The River sand which is most commonly used fine aggregate in the production of concrete, posses the problem of acute shortage in many areas, whose continued use has started posing serious problems with respect to its availability, cost and environmental impact.

Effect of Sawdust on the Compressive Strength of Concrete

2020-8-4  it workable. The addition of sawdust to the concrete was done by 5% increment up to 25% by weight of the fine aggregate. In all eighteen (18) concrete cubes (150mm x150mm x 150mm) were made after batching and mechanical mixing for the compressive strength tests. 2.4 Compressive strength tests

Experimental Research of Saw Dust as Partial

2020-8-12  The use of sawdust as partial replacement for fine aggregate is imperative because it will reduce the cost of production of sandcrete blocks, without loss of strength.The Sawdusts remain as waste in environment and should be used as materials for construction of building when used as fine aggregate.

Concrete using agro-waste as fine aggregate for

2016-12-1  The Agricultural wastes used as fine aggregate in concrete are sugarcane bagasse ash, groundnut shell, oyster shell, sawdust, giant reed ash, rice husk ash, cork and tobacco waste. The major differences of these agro-wastes are the place from where they collected and the processes to convert into a fine aggregate.

Alternative fine aggregates in production of

2020-9-20  Aggarwal and Siddique (2014) observed that compressive strength of the concrete reduced with addition of WFS and CBA at the equal replacement of fine aggregate in concrete. 40% of steel slag was found to higher strength as compared to control concrete beyond which the strength reduces (Qasrawi et al., 2009; Subathra Devi and Gnanavel, 2014).

Differences between sawdust and sand in concrete

Differences between sawdust and sand in concrete production Products. As a leading global manufacturer of crushing, grinding and mining equipments, we offer advanced, reasonable solutions for any size-reduction requirements including, Differences between sawdust and sand in concrete production, quarry, aggregate, and different kinds of minerals.

(DOC) investigation into the use of saw dust as an

Table 3.1 Mix ratio and percentage Sawdust content Specimen A B0.25 B0.50 B0.75 B1.0 Design 1:1.8:2.8:0.65 Proportion (cement: fine aggregate: coarse aggregate: water/cement Weight fraction 0.00 0.25 0.50 0.75 1.0 of sawdust (%) Table 3.2 Detail